Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Friction-style sway control system uses a telescoping bar with friction pads to fight trailer sway. Adjustable tension lets you set the right amount of resistance for your setup. Attaches to your trailer and weight distribution system or ball mount.
Features:
Note: Not for use on trailers with surge brakes. It is recommended that you remove this sway control unit before backing up/reversing and before towing in slippery conditions such as on wet, icy, gravel, or snow-covered roads.
When installing this sway control system, follow the included instructions and measure 24" straight back from the center of the coupler along the frame of the trailer to determine the location of the spacer plate and trailer-mounted attachment ball. To achieve proper alignment, the spacer plate may not be necessary in every application.
One friction-style sway control can be used for trailers with up to 6,000-lb GTW. If your trailer's GTW is between 6,000 lbs and 10,000 lbs, you will need 2 sway-control units, 1 on either side of the trailer. You will also want to use 2 units if your trailer is 26' or longer.
just as described
I have and will continue to purchase Curt products. Well designed, reasonably priced. Instruction clear and direct, tutorial video excellent.
Customer service, packaging and shipping from etrailer is consistently spot on!
Bought the sway control to help with the swaying on the highway. Took 15 minutes to install. Instructions that came with the bar were horrible. I had to follow instructions I found on you tube. Seems to work well. Time will tell.
As usual etrailer is on time with delivery. The staff are knowledgeable and very helpful.
I'm hopeful this item performs as described and attested to by others. I'm using it without WDS and have a welder to 'glue' the tab to my existing ball hitch. Of note -The screw holes on the Spacer Plate and Trailer Mounted Attachment Ball do not align correctly in any of the four possible positions. This is sloppy workmanship and grossly over-tolerant quality assurance. As is, two screws would go in 'clean,' with the two plates square and flush. The other two would feed extremely cock-eyed and crooked. I imagine the screws would fail trying to fully seat them. I suspect any failure ratings the manufacturer has established are seriously compromised. My welder has a drill press; he'll align the good holes and ream the others. I like etrailer. I'm sure they'd replace this. My choice for the DIY.
The sway control kit I ordered went on the receiver of my travel trailer easily and fits well. I tested the turn radius to see how sharp of a turn it would make without "hitting" and it performed perfectly. I haven't had the chance to take it on the road yet but don't anticipate any problems.
Justin
3/17/2019
Im so glad I ordered the sway control kit. Ive used it several times when pulling my travel trailer and it has made all the difference.
The sway bar works well. The retaining clip sometimes fall out of the tow vehicle end which could be a problem. I use 2 clips at that end.
This product made a huge difference in the sway problem I had with my travel trailer. Large trucks and/or cross winds were very scary. I would not recommend towing a large trailer without sway control.
Keith
7/27/2024
Still works great! I wouldnt tow travel trailer without it. Great value for the money.
This is my first time purchasing from etrailer and I have to say the experience couldn't have been better. I purchased this sway bar and other items for my new tow vehicle. After trying to piece together everything I needed for towing on a couple of other websites, and not having much luck, I went to etrailer. I was able to find everything I needed, very detailed product information, easy to navigate website, quick shipping, GREAT communication from customer service, and a price that was equal to or better than the other websites. Hands down a happy etrailer customer!
Brian
7/24/2019
No problem with the sway bar, BUT the Curt ball mount with sway bar mount looks like it has twisted. I only pull a Casita travel trailer 3500lbs behind my half ton pickup and havent put any unusual stress on it. Kind of disappointed...
Rachael H.
8/7/2019
Simple effective, well made. These are noisy on turns, similar to most friction sway control devices.
Sam
4/25/2024
After about 2000 miles, still working well and noisy
Received my anti-sway bar to add to my weight distribution hitch in less than a week. Fastest service I’ve ever had. Installed it and it works great! I could only go 57 mph before and now can keep up with everyone else on the freeway! etrailer is a great place to get anything trailer related. Have always had great service and will buy from them again. 5 stars
John B.
7/13/2020
Works like a dream! Easy to use and install. I would recommend this to anyone looking for one.
Works as advertised. Fits right on to Curt weight distribution hitch. Quality materials and a fair price.
Added this sway bar as a second one for my ToyHauler. With all the weight in the back of the trailer I needed a second. Since this brand was currently on my trailer and also on a second trailer I went with the tried and true. With the second sway bar I can pull my ToyHauler at 80 MPH next to tractor trailers and not get any after sway, it pulls straight. I highly recommend this sway bar, it only took me 30 minutes to install, most of that time was getting the measurements correct.
Preston H.
6/3/2020
I am using this with the sway bar on my weight distribution hitch. Being a toy Hauler most of my weight is in the back, I have no problems towing no sway, no bounce very satisfied
This sway control package is just what we needed! After towing our 3300 lb camper home with my wifes Jeep Cherokee, WITHOUT an anti-sway bar, I said I wasn't towing the camper anywhere until we had this installed. We drove in 20-30 mph crosswinds the entire 4+ hour drive back. With this installed, we hardly notice it. Now, you can't get rid of the wind itself, but you certainly don't have to worry about the trailer starting to move around on it's own - this is great for stabilizing everything.
Easy to install - just used the template they include with it, and then just drilled some holes through the frame of the camper and installed the hitch, hooked up and we were ready to go. We only use Curt products for our vehicles, utility trailer, and camper - nothing compares in my opinion.
Curt Weight distribution hitch assembly including dual Curt 17200 sway control bars for our heavy 30 foot RV. Purchased through Etrailer Corp. the information from Etrailer was fantastic on which hitch assembly was best for my application, the hitch, bars, sway arms were delivered exactly on time with no scratches or damage. My light weight 2010 pick pulled well and was level and handled winds and passing semi trucks in the wind a pleasure! Unfortunately I don't have pictures to show because I have recently bought a new F-350 and a new 40' -5th wheel trailer and from Etrailer purchased a Demco 18K Hijacker Auto Slide 5th wheel Hitch that works fantastically.
Thank you Etrailer for best prices and service!
Best towing device I have bought except electric brake controller. Total game changer for pulling my single axle 17 foot Whitewater Retro trailer. Some effort to drill holes in frame, but just indicative of how strong the metal is on the tongue, just be sure to use good drill bits. Driven in 50 mph crosswinds and no waggle! This should be standard equipment for every trailer. eTrailer has great prices and super fast delivery, always happy with my purchase experiences with them. Only improvement to device would be some kind of way to secure it to the tongue when not in use, it drops down perpendicular to ground and occasionally creates a problem with lowering trailer on to trailer ball or when leveling at campground. I just loop one of the security chains around it after unhitching and it is up and out of the way.
This is a replacement for one i didn't hook up and left it on the trunk of the trailer and never found it after I got home....lol
This one was a direct replacement for my 06 model and it works great.
As usual etrailer had what I needed and at a good price!
Lee T.
5/19/2021
Happy to report that after using this for a year it still works like new. Im very happy with the product
Unit works as intended. The problem i had with these sway control devices is that there is no instructions on how tightly you have to clamp them down to get the desired results. It took lots of trial and error to find the correct amount of sway control for my application. And part of the problem was a video i saw on youtube where a man tightened them down too far and it pulled the small ball off of the a-frame on his trailer. If i could afforded it, I wish I would have bought a newer style WD hitch with built in sway control instead of these slides.
I towed my trailer across country using this system and it worked great.
The anti sway bar works well and well worth buying and installing. There are 3 things I would say about it.
1. It has a 4 bolt mounting plate instead of 6. Disadvantage: poorer force distribution, Advantage: less drilled holes to weaken frame.
2.Could use better instructions on how to set it. It really is quite useless if you set it too loose.
3. Watch out for the front clip. Mine came off but the sway bar stayed attached (that's a good thing). I put a safety wire around the safety clip now.
I pull a travel trailer with a Audi Q7 TDI and it is a unibody car and in the owners manual it states not to use a WDH. My trailer takes about 250 lbs. off of the front axle so the steering input is just a bit light. With this sway control bar by Curt the car and trailer feels as one and the control of the trailer is great.
This was a great addition to my hitch I purchased 2 because of the length of my trailer and the weight that I tow.I have not had a single issue with towing in wind or letting off the accelerator to soon or going down hills. I highly recommend this is great addition to any hitch.
Great product. Installation instructions were clear and easy to follow. Everything pictured was in the package. I paired mine with the Curt ball mount receiver w/sway control tab 2" hitch item ID D320. Products work perfectly together to stop the sway. I would highly recommend this system to anyone looking for sway control.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Doug R.
11/9/2013
Bought this not realizing my trailers frame isnt large enough for the mounting bracket supplied. My frame is 3 on edge, while the bracket is the same. That would put the holes and self taping screws uncomfortably close to if not through the edge of the frame. Am going to try to fashion some clamping mechanism to hold the bracket on. Worst case, it slip and I dont have sway control, but thats the situation Im in now anyway. This is on a 3500 lb. 6x8 utility trailer.